Contact Probes

Used to measured curved and rough surfaces.

For more information on Filmetrics accessories, please contact our U.S. offices by calling +1 858-573-9300 (24 Hr, M-F) or contact us by e-mail.

• 
  

  CP-1-1.3

  Contact probe for measuring on flat or spherical samples. Ruggedized stainless steel monocoil.

• 
  

  CP-1-AR-1.3

  Similar to the CP-1-1.3, except optimized to reject backside reflections (96% rejection for substrate 1.5mm thick.) PVC-coated steel monocoil. For thicknesses up to 15µm.

• 
  

  CP-2-1.3

  Contact probe for getting into tighter concave surfaces. 17.5mm diameter.

• 
  

  CP-C6-1.3

  Contact probe for outside of cylindrical and spherical samples down to 6mm diameter.

• 
  

  CP-C12-1.3

  Contact probe for outside of cylindrical and spherical samples down to 12mm diameter.

• 
  

  CP-C26-1.3

  Contact probe for outside of cylindrical and spherical samples down to 26mm diameter.

• 
  

  CP-BendingRod-L350-2

  Contact probe with 300mm of bendable length, 350mm of total probe length. Good for configuring for hard-to-reach areas, but is not self-aligning to surface.

• 
  

  CP-ID-0to90Deg-2

  Contact probe for reaching inside surfaces, such as the inside diameter of food and beverage cans

• 
  

  CP-RA-3mmDia-200mmL-2

  Our smallest diameter contact probe has a tiny right-angle mirror for measuring the inside of tubes down to 3mm ID. Is not self-aligning to surface.

• 
  

  CP-RA-10mmHigh-2

  This contact probe has a right-angle reflector to measure between flat surfaces placed as close as 10mm apart.